一、What is self-lubricating SF-1 bushing

SF-1 bushing is a three-layer composite set, which is a self-lubricating bushing made of steel plate, spherical bronze powder, and PTFE three-layer composite coil.It is a sliding bearingmade by rolling.
It has the characteristics of low friction coefficient, wear resistance, good corrosion resistance, and oil-free lubrication. The use of this product has the advantages of reducing costs, reducing mechanical volume, avoiding shaft biting, and reducing noise.

二、SF-1 bushing Materials Structure And Thickness

  1. PTFE layer: 0.01-0.03 mm
  2. Porous bronze: 0.2-0.3 mm
  3. Steel backing: 0.7-2.3 mm
  4. Electroplating layer: Tin-plating about 0.005 mm, or copper-plating about 0.008 mm
sf-1 bushing

三、oil-free bearing SF-1 bushing Characteristics

  1. SF-1 self-lubricating sleeve has the characteristic of oil-free lubrication, which is suitable for application scenarios that are difficult to refuel.
  2. It has the characteristics of low friction coefficient, wear resistance and corrosion resistance, and a long service life.
  3. The coefficients of static friction and dynamic friction are relatively close, which can stabilize the accuracy of mechanical work.
  4. It can reduce mechanical vibration, thereby reducing noise.
  5. The liner can form a transfer film during use, which provides protection for the shaft and has low requirements for the shaft, making it more conducive to the machining of parts.
  6. Thin walled structure, as well as various thicknesses and shapes to support production.
  7. The steel back can be electroplated with different metal materials, which can be widely used in different application scenarios.

四、SF-1 bushing product type table

TypeLiningSinter BronzeBackingApplication Characteristic
MW-1W(P4)
/SF-1W(P4)
PTFE+PI+MoS₂+aramid
fibre+Other
CuSn8Zn3SPCC or DC01General,lead free
MW-1T
/SF-1T

PTFE+fibre+Other
CuSn8Zn3SPCC or DC01For geer pump
MW-1P
/SF-1P

PTFE+Bronze+Other
CuSn8Zn3SPCC or DC01For liner movement
MW-1W
/SF-1W

PTFE+fibre+Other
CuSn8Zn3SPCC or DC01lead free
MW-1B
/SF-1B

PTFE+fibre+Other
CuSn8Zn3CuSn6.5P0.1Acid-resistant and alkali-resistant,
better reliability
MW-1D
/SF-1D

PTFE+fibre+Other
CuSn8Zn3SPCC or DC01For Hydraulic
MW-1S
/SF-1S

PTFE+fibre+Other
CuSn8Zn3304 or 316Better acid-resistant and
alkali-resistant
MW-1SS
/SF-1SS

PTFE+Other
no304 or 316Best acid-resistant and
alkali-resistant,light load

五、Zhejiang MYWAY Co., Ltd.

Other bushing-related content will be updated in the future. You can leave a message if you want to know more.

Leave a Reply

Your email address will not be published. Required fields are marked *

Resolve your needs and questions​

Consult us now

Resolve your needs and questions