Copper Bushing-ZCuSn6Zn6Pb3, ZCuSn5Zn5Pb5
Copper Bushing suitable for lining parts working under moderate loads and speeds.
ZCuSn10P1
ZCuSn10P1 is a tin phosphorus bronze with wear resistance and high hardness. Suitable for connecting rod bushings with strong friction under heavy loads, high speeds, and high temperatures.
ZCuAl9Mn2, ZCuAl9Fe4
Aluminum bronze ZCuAl9Mn2, ZCuAl9Fe4 have high strength/density and stable chemical properties. Commonly used for valve body liners, etc.
High strength aluminum brass
High strength aluminum brass is a special type of brass. Has high strength、hardness and wear resistance, good corrosion resistance and plasticity. Bushing suitable for high loads on heavy-duty machinery
Copper Bushing-ZCuSn10P1
ZCuSn10P1 has good hardness 、wear resistant and is not prone to biting characteristic. So it’s more conducive to casting and cutting.Suitable for connecting rods, bushings, and bearing shells in working environments with loads below 20Mpa and sliding speeds of 8m/s.
ZCuSn10Pb5
ZCuSn10Pb5 is corrosion-resistant, especially for dilute sulfuric acid, hydrochloric acid, and fatty acids. Suitable for crusher liners and bearing shells.
ZCuPb10Sn10
ZCuPb10Sn10 has good lubrication, wear resistance, suitable for use as a bimetallic bushing. Bearings for vehicles, bimetallic bearings for internal combustion engines with a peak load of 100Mpa, and piston pin sleeves.
Copper Bushing-ZCuPb15Sn8
has good sliding and self-lubricating properties, is easy to cut, has poor casting performance, and has good corrosion resistance to dilute sulfuric acid under the conditions of lacking lubricants and using water quality lubricants. Bearings with high surface pressure and side pressure are suitable for bimetallic bearing shells of internal combustion engines, mainly used for piston pin sleeves with high loads up to 70Mpa.
ZCuZn38Mn2Pb2
ZCuZn38Mn2Pb2 has good mechanical properties, corrosion resistance, wear resistance, and cutting performance. Suitable for general applications such as ships and instruments, such as bushings, bearings, sliders, etc.
Zhejiang MYWAY Co., Ltd.
Zhejiang MYWAY Co., Ltd. was established in 2005. It is a professional bushing production company. We have more than 15 years of bushing experience. MYWAY currently has an operation center and three production bases, as well as more than 2,000 bushing molds, the main bushing products include composite bushings, bimetallic bushings, bronze rolled bushings, graphite embedded bushings, special copper bushings, steel bushings, powder metallurgy bushings and other related products. At present, Maiwei has reached in-depth cooperation with leading companies in many industries such as gearbox bushings.
We have to offer:
Stable Quality
Complete range of bushings for transmission/agricultrue machinery/automation etc all kinds of areas
5,000+ pcs of existing molds
Competitive pricing: Raw material producer to better control cost
Profit Concession under currency fluctuations
Other bushing-related content will be updated in the future. You can leave a message if you want to know more.
