Recent Posts
608 Bearings: Specifications, Applications and Selection
Introduction to 608 Bearings
The 608 bearing represents one of the most versatile and widely used miniature deep-groove ball bearings in the industrial and consumer sectors. With standardized dimensions of 8mm bore diameter, 22mm outer diameter, and 7mm width, this compact yet powerful component efficiently handles both radial and axial loads while maintaining excellent high-speed performance. Its robust design and reliable operation have made it indispensable across numerous applications, from precision instruments to heavy-duty machinery.
Table of Contents
1. Technical Specifications and Design Features
a. Standard Dimensions and Load Ratings
Table 1: 608 Bearing Basic Specifications
| Parameter | Specification | Notes |
|---|---|---|
| Bore Diameter | 8 mm | Standard shaft size |
| Outer Diameter | 22 mm | Housing requirement |
| Width | 7 mm | Space consideration |
| Dynamic Load Rating | ~3.3 kN | Basic capacity |
| Static Load Rating | ~1.35 kN | Stationary load |
| Weight | ~11.8 g | Lightweight design |
b. Advanced Design Elements
Deep-Groove Geometry: Enables superior radial and axial load capacity from multiple directions
Optimized Ball Configuration: 7 steel balls with 3.969mm diameter ensure optimal load distribution
Precision Raceways: Ground and polished surfaces minimize friction and heat generation
2. Material Options and Performance Characteristics
Table 2: Material Comparison for 608 Bearings
| Material Type | Advantages | Limitations | Best Applications |
|---|---|---|---|
| Bearing Steel (GCr15/52100) | High load capacity, cost-effective, durable | Prone to corrosion | Industrial machinery, power tools |
| Stainless Steel (440C) | Excellent corrosion resistance, food-grade options | Lower load capacity, higher cost | Medical devices, food processing |
| Ceramic (Hybrid/Full) | High-speed capability, low friction, non-conductive | Premium cost, impact sensitivity | Precision instruments, aerospace |
| Plastic Composites | Chemical resistance, lightweight, self-lubricating | Temperature limitations, low load | Chemical equipment, light duty |
3. Sealing and Shielding Configurations
Table 3: Sealing Options and Performance Characteristics
| Seal Type | Code | Protection Level | Speed Capacity | Typical Applications |
|---|---|---|---|---|
| Open Type | – | Minimal protection | Highest | Clean environments, frequent maintenance |
| Single Shield | Z | Basic dust protection | High | Moderate contamination risk |
| Double Shield | ZZ | Good dust protection | Medium-high | General industrial use |
| Double Rubber Seal | 2RS | Excellent sealing | Medium | Moisture, chemical environments |
4. Applications Across Industries
a. Industrial Applications
Electric Motors: Supporting rotor shafts in small to medium motors
Power Tools: Ensuring smooth operation in drills, grinders, and sanders
Conveyor Systems: Supporting rollers and pulleys in material handling
b. Consumer and Specialized Applications
Sports Equipment: Skateboards, roller skates, and fitness equipment
Office Machinery: Printers, scanners, and copiers
Medical Devices: Precision equipment requiring reliable rotation
5. Selection Guide and Technical Considerations
Table 4: 608 Bearing Selection Matrix
| Application Requirement | Recommended Type | Key Considerations |
|---|---|---|
| High-speed operation | Open or ZZ shielded | Minimal friction, heat dissipation |
| Wet or corrosive environments | 2RS sealed stainless steel | Corrosion resistance, sealing effectiveness |
| Precision instruments | Ceramic hybrid ABEC-5+ | Vibration reduction, dimensional stability |
| Cost-sensitive projects | Standard steel with ZZ shields | Balance of performance and cost |
| Heavy load conditions | High-grade steel with reinforced cage | Load capacity, impact resistance |
6. Quality Assurance and Testing Standards
Our 608 bearings undergo rigorous quality control procedures:
Dimensional Accuracy: Verified against ISO 492 and ABEC standards
Material Certification: Traceability to original material batches
Performance Testing: Load capacity, noise level, and temperature resistance
Life Cycle Testing: Accelerated aging tests to predict service life
7. Advanced Technical Data
Table 5: Performance Specifications by Material Type
| Performance Characteristic | Bearing Steel | Stainless Steel | Ceramic Hybrid |
|---|---|---|---|
| Maximum Speed (rpm) | 32,000 | 28,000 | 45,000 |
| Operating Temperature | -30°C to +120°C | -30°C to +150°C | -60°C to +300°C |
| Corrosion Resistance | Low | High | Excellent |
| Electrical Conductivity | Conductive | Conductive | Non-conductive |
| Cost Factor | 1x | 1.5-2x | 5-10x |
8. Conclusion: Your Trusted 608 Bearing Partner
The 608 bearing’s exceptional versatility and reliability make it a critical component across countless industries. By understanding the detailed specifications, material options, and application requirements outlined in this guide, you can make informed decisions that optimize performance and longevity. Our comprehensive range of 608 bearings, backed by stringent quality control and technical expertise, ensures you receive solutions precisely matched to your operational needs.
Contact our technical team today for personalized recommendations, sample requests, or detailed quotations. Let us help you select the perfect 608 bearing solution for your specific application requirements.
FAQ: Comprehensive 608 Bearing Guide
What do the different suffixes mean in 608 bearing codes?
Suffixes indicate sealing type: Z (metal shield), ZZ (double shield), RS (rubber seal), 2RS (double rubber seal)
How do I choose between shielded and sealed bearings?
Metal shields (ZZ) offer better speed capability, while rubber seals (2RS) provide superior contamination protection
What are the temperature limits for different 608 bearing types?
Standard steel: -30°C to +120°C
Stainless steel: -30°C to +150°C
High-temperature variants: up to +250°C
How important is the ABEC rating for my application?
ABEC-1 sufficient for most applications; ABEC-3 or higher recommended for precision equipment
What lubrication options are available?
Standard grease, high-temperature grease, oil, or dry lubrication for specific environments
100000+ Types of Bushings – Contact Us for Details